Industrial Chandeliers

How to choose industrial chandeliers

Height carries these fixtures. An open metal frame reads as a drawing in the air when there is space above and below it, and as a cage when the ceiling is low. Nine feet is comfortable, ten or more is where the larger orb and cage frames belong, and under eight feet a single tier stays the sensible option.

The room has to answer back. Brick, concrete, steel, dark cabinetry and unfinished wood all hold their own against exposed metal. In a soft room of pale plaster and upholstery the same fixture can look like it was left behind by a previous owner, so bring in one other hard surface, even a metal frame or a raw wood table.

Which industrial frame for which room

Frame type	Best in	What it does	Price here
Hemp rope	A loft, a barn conversion, an island	Bare lamps on a frame that reads as handmade	$169 to $489
Wire cages	A workshop look, a kitchen island	An open frame casting a pattern around it	$132 to $459
Wood beams	A long table, a wide counter	Coverage down a line a round frame leaves dark	$149 to $859
Glass shades on iron	A dining room, a converted space	Dark metal against several softened points	$132 to $960
Bare metal frames	An entry, a stairwell, a dining room	An outline in metal with the lamps fully visible	$270 to $1,340

What to check before fitting

E26 and E27 sockets: The screw fittings for standard household bulbs, used by most frames here. On an open cage or a bare arm the lamp is the whole of what you see, so a filament style bulb is part of the design.
Bulb not included: Almost every fixture on this page ships without lamps, which each page states. Buy a matched set at once, since an exposed frame shows any difference in tone from the far side of the room.
Hardwired, ceiling mounted: The fixture joins the house wiring at a box and fixes over it, with no plug. Nearly all of this range installs this way. Iron and reclaimed wood are heavy, so read the weight before ordering.
Dimmable with a bulb and a dimmer: Most frames here dim only when a dimmable bulb meets a compatible wall control, since the frame carries no driver. With exposed filament lamps that pairing matters, because they glare at full output.
Natural rope and reclaimed wood: Hemp rope and salvaged timber differ from piece to piece by nature. The tone, the knots and the marks in front of you will not match the photograph, which is the material rather than a fault.

Weight and mounting for industrial chandeliers

These frames are solid metal and heavier than the fixtures they resemble. A ceiling box is marked for a set weight, commonly 50 pounds, and anything above that needs a brace fitted between the joists. Read the weight on the product page and compare it with the figure stamped on your box before ordering. Where the fixture hangs over a table, note the chain length as well, since a heavy piece is not something to shorten on a ladder while holding it.

What lamps suit an open metal frame?

Filament shapes, because they are on show. A globe or a tube with a visible filament matches the exposed hardware and gives the frame something to hold. Keep the output modest at each socket, since six bright lamps in an open cage produce glare from every seat in the room.

Do these work over a dining table?

They do, provided the ceiling gives the frame room to breathe. Hang the lowest point 30 to 34 inches above the tabletop and keep the frame narrower than the table by at least twelve inches on each side, so nobody meets metal when leaning in.

Continue with Modern Chandeliers, Minimalist Chandeliers, Farmhouse Chandeliers and Industrial Pendant Lights. This page is part of Chandeliers.

What are the different types of industrial chandelier?

Three shapes do most of the work. The cage frame, an open metal structure around each lamp, which leaves the filament visible and throws line shadows. The exposed bar or cluster, sockets mounted straight onto a metal frame with no shades at all. And the shaded industrial fixture, enameled metal cones or domes pointing down, which came from workshop lighting and is the only one of the three that controls glare. The first two are decorative light sources and want a second layer in the room. This page holds 26 frames.

How much does an industrial chandelier cost on this page?

These are among the lower chandelier prices on the site: $132 to $830, with the middle near $279 and nine in ten under $660. Plain steel and iron construction with no glass or stone is the reason.

Are the metal parts hot to the touch?

With an LED lamp, no. An LED gives off a fraction of the heat of an incandescent or halogen lamp of the same brightness, and what heat there is leaves through the base rather than the glass, so an open cage or an enameled cone stays near room temperature. The exception is a filament style lamp run at full output in a tight cage, where the glass itself gets warm enough to notice. A fixture within reach of a worktop or a stairwell handrail is worth checking for that reason, since the shade is the part a hand finds first.

Buying guide reviewed October 2026 by the OroDwell editorial team.