Summer’s still going strong! Get 10% off everything on the website with the code: SUMMER10

NOTICE: Delivery times may be slightly longer during the summer months

  • Free shipping

  • Attentive Customer Service

  • Easy Returns

  • Secure payment

Dispatched within 48 hours

–10% With the code

SUMMER10
View as

Iron Chandeliers

Iron chandeliers bring structure to a ceiling rather than sparkle. The frame is the design, and it holds its shape in a room with heavy furniture, exposed beams or a tall stairwell. Every fixture gathered here is built on an iron frame, so weight is the first specification to check.

How to choose iron chandeliers

Start with the frame, because on a dark fixture the frame is the whole design. An open cage or lantern with visible bars throws patterned shadow across the ceiling, which reads well on plain plaster and turns busy under a beamed or papered surface. A plain ring or a candle arm keeps the spill even.

Then match the finish to the metal already in the room. Flat black holds a graphic edge against white walls and pairs with oak, leather and stone. An aged or bronzed surface carries a brown undertone that sits closer to warm brass and older woodwork.

Sizing and ceiling support for iron chandeliers

Iron is dense, so the figure that decides the installation is the weight on the specification rather than the diameter in the photograph.

  • Over a dining table: table width in inches minus 12 gives a workable diameter.
  • Drop above a table: 30 to 34 inches from the surface to the lowest point.
  • Entry or stairwell: at least 7 feet of clear floor height beneath the fixture.
  • Mounting: compare the listed weight with the rating stamped inside the ceiling box.

Where the specification calls for a brace or a fan rated box, the fixing has to reach framing rather than drywall alone. On a sloped ceiling, confirm the canopy is built to sit at an angle.

What diameter suits a dining table?

Take the table width in inches and subtract about 12. A 42 inch wide table lands near 30 inches across. Center the fixture on the table rather than on the room, since the table is what the eye lines it up against once you are seated.

Does a heavy frame need a different ceiling box?

It depends on the weight listed for the piece. A standard box carries a light fixture, while a heavier frame calls for a brace supported or fan rated box anchored into framing. The product page states the weight, and the rating is stamped inside the existing box.

Related pages: Crystal Chandeliers, Brass Chandeliers, Rattan Chandeliers and Kitchen Chandeliers. The full category is Chandeliers.

Compare /5